P-Sea Software

Brought to you by P-Sea Software Co. USA
PO Box 1390
Morro Bay, CA 93443
Ph.# (805) 772-4396



P-Sea Software Full Install 7.33 Downloads

NOTE:If you get a message PLEASE INSERT P-SEA WINDPLOT KEY with version 7.33.17 then please download and try the new version 7.33.22 or better or do the updates only before calling us. Thanks

You can also use any of the the current versions of WindPlot (7.29-7.32) we have made for Vista on Windows 7, 8 and 10.

WINDOWS 8.1 and 10 WARNING!

Try NOT to let the computer do any updates but do not stop them once they start. Pull the internet cable out as soon as you get Windows registered with Microsoft. Turn Windows Updating service off as soon as you can. Be sure to install the 8.1 keydrivers if you have key#'s less than 8000. If you have Winows 10 (excluding the PRO version then we suggest you go to a computer store and have them disable the WiFi and change the IP to a static address so it can't update itself.
NOTE: We found that most memory sticks will store no more than 65000 files so those with over 32000 track files should beware that all of your tracks may not be saving to a memory stick.

VERY IMPORTANT NOTE FOR WINDOWS WINDOWS 7, 8 and 8.1 VISTA INSTALL:

Please turn off User Account Control (AUC)/Down (and leave it off) BEFORE installing any P-Sea Software program or drivers. Windows 10 DOES NOT need the User Account turned off.
WINDOWS 10 NOTE: NEW as of 9/26/2016: We have found it isn't necessary (in fact not recommended) to turn windows User Account Control off when installing WindPlot in a new Windows 10 computer.
Windows 7 instructions (UAC OFF) Click here

Windows 8 search SETTINGS for UAC then move lever down to NEVER NOTIFY
For Vista:
Click Windows Start button to get the start menu.
Then click on you user icon at the top of the start menu (as done on the Windows 7 instructions above).
Then click on TURN USER ACCOUNT CONTROL ON or OFF
Then uncheck the USER ACCOUNT CONTROL (UAC)to help protect your computer.
Then click OK button and restart your computer and proceed to install your program.

NOTE: P-SEA FishFinder USERS may need new activation code
If you have any issues with this verison then try: Full Software installsVersion 7.28 WindPlot users NOTE: Check your current version, if you are running 6.77 or older then you will need to purchase an upgrade CODE in order to use any of the latest software downloads that are listed below. All programs below are compatible with Windows 7 & 8, 10, Vista, XP, 2000pro and 98se. Shut down all programs before installing any software

NOTE 2:If you recently (re)installed WindPlot and just can't get the COM ports to see the GPS data try using the COM PORT TEST programs in Windows program list in the P-SEA WINDPLOT group. If it works there then check the Use Old COM driver check box in the WindPlot CHG.COM PORTS/TIME menu.

NOTE 3:If you get registry error messages after installing any WindPlot then copy a file called "WpRegALL.BAT" from "C:\WpInstall" to "C:\Windows\SysWow64". Then at the Windows Search type in "COMMAND" and look for "COMMAND PROMPT" and Right-click on it and choose "RUN AS ADMINSTRATOR" and you should get a black window. Type in "CD\WINDOWS\SYSOW64" and press enter. Now enter "WPREGALL" and press enter. After a bunch of registers go by then try WindPlot again.

If the program locks up while "Checking charts" is on then delete the IM31BSB.DIL file from your PC-PLOTT program directory and try it again.

Close any programs you have running.

wp733MAX.exe (Most common) P-Sea WindPlot MAX (C-Map compatible) 7.33.22 8/31/2017 full install.

wp3D733MAX.exe P-Sea WindPlot 3D MAX (C-Map compatible) 7.33.22 8/31/2017 full install.

wp733.exe P-Sea WindPlot II (Navionics compatible) 7.33.22 8/31/2017 full install.

wp733_3D.exe P-Sea WindPlot II 3D (Navionics compatible) 7.33.22 8/31/2017 full install.

wv733MAX.exe P-Sea WindView 7.33.22 8/31/2017 full install.

WV733_3DMAX.exe P-Sea WindView MAX 3D (C-Map compatible) 7.33.18 8/17/2017 full install.

wv733_3D.exe P-Sea WindView II 3D (Navionics compatibl) 7.33.1 6/1/2017 full install.

wv733.exe P-Sea WindView II (Navionics) 7.33.22 8/31/2017 full install.

RadarPC731.exe P-Sea Stand-Alone program Ver.7.33.0 8/9/2016 full install (Will run 20 minutes w/o key).

Update Download Quick update 733.22: version 7.28 or better should aleady be installed. Includes new 7.28.11 version.

FISHBOUNDARYSHPFILES.exe NOAA SHAPE files containing all MPA's for the USA in a self-extracting program. Just run by clicking on UNZIP after completing the download and it will be intstalled in the proper folder for the P-Sea MPA Importer program. Instructions not complete yet.

USBMMR2_Driver_Setup.exe P-Sea WindPlot MAX USB/Card Reader driver install
(Required if using USB C-Map Card Reader: Download to desktop and then double-click to start).

WpRegAll.exe P-Sea WindPlot II/MAX self-regiser bat file
After download-use COMMAND to navigate to C:\Windows\System32 and exicute WPREGALL
If when you first run the program and you get a message that says the IM31BSB.DIL file is out of date and you can not find it then run this file to correct it. BSB_UPDATE.EXE

Known Working USB to Serial Adaptors for Windows 8, 7 and Vista

Tripp-Lite model U209-000-R, Cool Gear,I/O Gear (With updated driver) and Key Span. - NOTE: If ANY USB to serial device ever installs on any COM number less than 5 then change it to a higher number like 9 or you may get computer lockups or blue screens. You can change the COM number using windows device manager, locate PORTS then locate the COM port, right click & choose properties, click settings and advanced button.
Note:Radio Shack's USB adaptor works in Windows 7 but has been reported to cause the computer to crash when sutting WindPlot down. If this happens, check the "Use Old COM" in the Adj.COMs window with cables unplugged.

What's new in version 7.33?


NOTE: We had issues with 7.32 so we took 7.28 and added most of the 7.32 features below back in it. The only NEW item that wasn't in 7.32 is the Stellwagen charts will now create a tumbnail. Improvement:7.33.27 Added side-bar launch from Pres.Pos.readout.
Improvement:7.32.23 Track Search&add now uses the track search setting to copy tracks to WindPlot. Limit adding tracks by range, type date or any search setup.
Improvement:Track search and add now will not add a track if it is already loaded.
Improvement:Delete marks by range in mark S&E list all listed or all not listed.
Improvement:Mark and Track Search & Add now has COPY ALL and PREIVEW. The Preview will display a USA map with dots showing where the marks or tracks your going to add are located. It will also do a quick check to see if it might already be loaded.
Improvement:Touch Mode: Right-Click either radar or FishFinder button when either is on to have control buttons show on main screen for use when you have a touch screen.
Improvement:Keyboard no longer needed - use touch screen or click w/mouse.
Improvement:Search & Add will preview selected files & you can select more than one file to add now.
Improvement:You can turn resolution checking on or off.
Improvement:Mark/Track Search & Add now verifys the data that is added.
Improvement:ESC key (Panic button) menu added.
Improvement:3D Top view works
Improvement:3D controls and buttons auto-hide like the plotter does.
Improvement: added change fonts choice when clicking on readouts.
Improvement: Change Lat/Long line color and width
Improvement:Bigger fonts and message boxes
Improvement:Graphic representation of multi-monitor setup
Improvement:In efforts to fix some errors that are occuring when saving data, we have added a VERIFY check box in the mark and track save box. This will save then reload and compare the files to the data in RAM.
Fixed:>7.33.22 Fixed AIS button on tool bar
Fixed:>7.33.17 Fixed track multi-color mode. Fixed entering marks if you had no marks to start with.
Fixed:>7.33.8 BATHYMETRIC CHARTS: All prior versions 7.33 have issue with showing and ranging bathymetric charts. If you have any version 7.33.0 - 7.33.7 then run the update below or call for a CD to be sent to you.
Fixed:7.33.2 Cursor not jumping to location/redraw when mouse moved/installs fixed.
Fixed:7.32.21 Mini-chart box not maintain setsizes
Fixed: Flickering buttons
Fixed:7.32.14 Not all files were updated in 7.32.13 so only 3D Max worked with marks and tracks
Fixed:7.32.13 Fixed marks and tracks loading troubles with some WindPlots.
Fixed:7.32.11 Sometimes settings not saving and sometimes marks come up as erased all the time.
Fixed:7.32.8 Radar on full screen with multi-monitors didn't work right
Fixed:7.32.7 Mark S&A mark count error fixed
Fixed:7.32.6 3D buttons now stay on screen.
Fixed:7.32.6 Fixed getting 0's in mark search and edit.
Fixed:7.32.6 Error found when improper marks and tracks resolution was detected.
Fixed:7.32.3 Fixed mixed high/low resolution mark repair.
Fixed:7.32.3 Raster chart search didn't work
Fixed:7.32.3 AIS: No targets showing was actually the new AIS button on tool bar. Changed default to ON and fixed so it is remembered.
Fixed:7.32.2 Raster Chart List: Chart search with keyboard would not work.
Fixed:7.32.2 Backup Window: Backup drives would not change right
Fixed:7.31.2 Marks loaded with both hi and low resolution marks the program would not fix it
Fixed:7.32.1 Fixed Mark Search and Edit ADD NEW MARK
Fixed:Adjusting the radar in Radar real display mode works better.
Fixed:Install asked No multi-area found fixed
Fixed:Caution chart button is working right again
Fixed:Save route status fixed
Fixed:STC curve on left redar buttons were not updating
Fixed:Fixed high/low reslolution switching

Install problems


In some cases files do not register. Try opening the CD (required) then find one of these files:SETUP.EXE (WindPlot II), SETUPMAX.EXE (WindPlot MAX), SETUP3D.EXE (WindPlot II 3D) or SETUP3DMAX.EXE (WindPlot MAX 3D). Then right-click on the one you want to install and choose:RUN AS ADMINISTRATOR then it should work. Be sure to give the installer program time to finish. It is common to get a few error messages when installing a and then when first running the newly installed programs. Just try and run it (the installed program) at least twice before reinstalling or calling for help.

3D with Windows 7... If you install WindPlot 3D and it crashes when trying to open the 3D window then download the the following DirectX update file:

directx_feb2010_redist.exe

Run it and tell it to extract to a "DirectX" folder on the C drive. Then locate the "DirectX" folder using "Computer" and then locate the DXSETUP file inside it and double-click it to make it start then follow the instructions from there. The 3D window should then open after all files are updated.
LORAN-C automatic correction factors (ASF)
When this 7.29 update is installed and running, you should see a "USE ASF" check box on the TD calibration box and in the TD to LL converter located in the OPTIONS menu. Just check this and it will ask for an activation code. Purchase the code and enter it here. Then, you will be using ASF when the box is checked and using your old calibrations when it is not checked. Compare them now before Loran-C is shut down.. We believe the ASF corrections to be almost as close as the calibrated values for working offshore (NOTE: Errors will incease in ASF corrections as you get close to land.)
If you never see any message or the WindPlot II program starts but quits right away and the THREED32.OCX register described above didn't work then try the following:
Reinstall the program this way:
Use Windows Explorer to find the folder named "WpInstall" and open the folder. Right-click on the SETUP??? file and choose "RUN AS ADMINISTRATOR". The ??? after setup will depend on the program your installing: P-Sea WindPlotII is "SETUP.EXE", P-Sea WindPlot MAX is "SETUPMAX.EXE", WindPlot 3D is "SETUP3D.EXE" and WindPlot MAX 3D is "SETUP3DMAX.EXE". Then finish reloading the program.
If that fails they search for RUN and open it. Then RUN and enter REGSVR32 /u SAPI.DLL and click on OK
If it does not say the operation was completed successfully then search for SAPI.DLL and copy it to the Windows/system32 folder.
Now enter REGSVR32 SAPI.DLL at windows RUN box and click on OK then try running the program again.

New install problem of no start or OUT OF MEMORY: We have found a file called THREED32.OCX is not registered by windows like it should. Try the following
1) Click on START then choose RUN.
2) Clear it out and enter: REGSVR32 /U THREED32.OCX then click on OK (you may get an error message. that is ok)
3) Now clear out and enter REGSVR32 C:\PC-PLOTT\THREED32.OCX then click on OK(you should get a message that it was successful)
4) Now try WindPlot, it should run now.

File names and dates to be replaced for KEY DRIVER ISSUES:
NVWGC16.DLL 6/13/2001 168,456 bytes
HINSTALL.EXE (4.65) 11/9/2001 1,174,534 bytes (Not used anymore)
HINSTALL.EXE (4.96) 3/21/2005 3,936,000 bytes (Not used for Vista!)
If you still can not get the keys to work, make sure there are no other copies of these files anywhere in your system with earlier dates.
Rainbow key users will have to upgrade to the latest key to get WindPlot to work in XP or 2000pro!
[IMAGE]Back to P-Sea Software Home page

[IMAGE]webinfo@p-sea.com